Ramsond RMM4 2-in-1 Air Hardwood Flooring Cleat Nailer and Stapler Gun
 Regular Price: $249.99 | |
Product Details
Dear visitor! This website has been designed to help you find THE BEST PRICE. When you are ready to buy, your payment will be processed through one of the most TRUSTED SUPPLIERS directly. |
| Not what you're looking for? Try smart custom search: |
Customer Review
Great tool that does it's job without much babysitting.
Was skeptical, as I usually am, but this tool lives up to its name.Have installed alot of 3/4" 2-1/4" plank oak flooring with it so far, have had 1 misfire. Instructions say to not hit it too hard, but I found that it takes a good solid whack to get it to fire completely. Once you do that, it's a breeze. Always seats where it's supposed to, and fires the nails to the right depth. Too light a whack will not sink the nails.It's really solidly built and balanced really nicely.One drawback, I wish I could check magazine level without opening it up, but it's not too bad. It makes a hollower sound when you're dry firing.
Top to learn more
Product Description
Ramsond has quickly become a recognized name for the quality and durability of its products. The Ramsond RMM4 2-IN-1 flooring stapler & cleat nailer combination is another testament to the recognition that Ramsond tools now enjoy. With over 30,000 units sold in North America, the RAMSOND (R) RMM4, patented combination 2-in-1 hardwood cleat nailer and stapler is an engineering marvel. It shoots both cleat nails and staples. It shoots 15.5 and 16 gauge staples ranging from 1 to 2 inches, and "L" cleat ranging from 1-1/2" to 2". The 2-in-1 magazine has a capacity of 100 staples/cleats. It is highly durable and contractor/industrial quality, yet light weight and agile. The body of this gun is constructed of durable die-cast alloy for job site durability and low weight. It comes with an extra-wide composite non-marring base plate for added stability and protection against scratches to the flooring surface. It provides a conveniently long reach handle with an ultra-padded cushioned grip for balance and optimal operating comfort, stability and safety. Internally, the driver blade is constructed of a very tough heat treated and hardened steel. The composite base plate designed to allow the user to drive fasteners much faster and closer to the wall while protecting the flooring surface from marring. This ergonomically designed multifunctional tool is manufactured under the strict ISO guidelines for quality control. With nearly 30,000 sold, this product has become a symbol for reliability and durability. Top to learn more
The patented design of the Ramsond RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer lets you shoot both staples and cleat nails from the same gun--without changing magazines. Powered by compressed air, this tool features patented air booster chambers for maximum driving force and speed. It tackles virtually all thickness of hardwood flooring and includes a non-marring base system to protect against damage. For ease of use, its durable, die-cast alloy body is lightweight and comfortable to hold.
| ||||
 Accepts 15.5- and 16-gauge staples from 1" to 2" and "L" cleats from 1-1/2" to 2". |
 The two-in-one magazine and driver system accepts both cleats and staples. View larger. |
 The RMM4 continuously stores compressed air in two patented air acceleration/booster chambers in the handle. View larger. |
![Ramsond RMM4 Non-Marring Base System](http://g-ecx.images-amazon.com/images/G/01/th/content_26/Q2_2010/c26-B001JT64U6-4-s._V154989467_.jpg") The base system has two composite disks in front, a middle guide, and a rear nylon-derivative plate. View larger. |
This dual-purpose tool has a patented two-in-one magazine and driver system that accommodates both cleats and staples. Designed for 15.5- and 16-gauge staples from 1 to 2 inches, and "L" cleats from 1-1/2 to 2 inches, the magazine has a 100 staple/cleat capacity. Loading the fastener is quick and easy--simply pull the magazine back, drop in the fasteners, and release the drawer--it takes less than 10 seconds.
Precise Air-Powered Operation
The Ramsond RMM4 operates with the power of compressed air (60 - 120 PSI) and is equipped with a standard 1/4-inch NPT air inlet for easy compatibility. To use, simply attach your air compressor's hose to the RMM4's air inlet, then rest the nose of the RMM4 squarely against your work surface to fire.
The direction and angle of the staple/cleat will be automatically aligned for precision driving. And with only a slight strike of the mallet upon the actuator, the RMM4 will shoot a cleat nail or staple through your flooring at the proper angle and depth.
Patented Air-Booster Chambers
Most conventional flooring nailers/staplers store compressed air within the body of the tool. Upon mallet strike, the air reserved in the body of the tool is released, driving the blade and shooting the fastener. The RMM4 takes this design one step further. In addition to storing compressed air inside its body, the RMM4 continuously stores compressed air in two patented air acceleration/booster chambers located in the handle.
By storing extra compressed air, these sealed chambers ensure that the fasteners shoot with sufficient force for perfect penetration in the flooring surface. The booster chambers also accommodate quicker retraction of the actuator and blade when compared with conventional units.
Non-Marring Base System
Featuring an adjustable non-marring base system, the RMM4 provides protection against scratches and allows you to drive fasteners fast and close to the wall. The base system is equipped with two composite disks in the front, a middle guide, and a rear nylon-derivative plate. The combination of these three mechanisms ensures that the surface of your hardwood flooring is not marred or damaged during installation. It also provides for tool balance and optimal positioning against the work surface for fast, accurate installation.
Works with Most Thicknesses of Hardwood Flooring
The RMM4 series is suitable for virtually all thickness of hardwood flooring (1/2 inch, 5/8 inch, 3/4 inch, and 25/32 inch). It comes with two nylon composite base plates--simply install the appropriate base plate for your application.
Durable and Comfortable
With over 30,000 units sold in North America, the RMM4 is sure to deliver on its promises. Designed for long-term use, the Ramsond RMM4 is an industrial-strength power tool that's comfortable to use. Its body is constructed of a durable, lightweight die-cast alloy, and its driver blade is constructed of heat-treated hardened steel for long-lasting resilience. For user comfort, the RMM4 has a long-reach handle with a padded cushioned grip that offers increased balance and control.
The RMM4 Two-in-One Hardwood Flooring Stapler and Cleat Nailer is manufactured under strict ISO guidelines for quality control and safety, and it is backed by a one-year warranty.
What's in the Box
Flooring Stapler/Cleat Nailer, mallet, goggles, bottle of oil, four Allen wrenches, internal key/wrench, O-ring kit, two nylon composite base plates, and a blow-molded carrying case.
 The stapler/cleat nailer, mallet, goggles, oil, and accessories store neatly in a durable carrying case. |
Top to learn more
Great Nailer for the Price!
As most other people who bought this flooring nailer, I couldn't justify spending 400 plus on the Bostich or Porter Cable. I don't like renting tools from the home improvement stores because I like the freedom to use the tools whenever I want so I can do the job at my own pace. I gave it 4 stars because when I first hooked up the air supply, I heard some air leaking from where the handle meets the body of the nailer. I found that some of the bolts were not fastened down all the way. I just took the wrench that was supplied and tighten the bolts and it hasn't leaked air since. The other reason for 4 stars is that the logo's and SN are just stickers, and the user manual is not that great for beginners like me. As far as the functioning of the nailer, it gets 6 stars! I put down 3/4 inch pre-finished oak floor and the RMM4 worked perfect without a single misfire! Overall, I would recommend this tool in a heartbeat, especially to those who are trying to decide whether or not to...
Top to learn more
Good Floor Stapler
I read all the reviews and ordered the nail gun. I opened the box, oiled up the gun and off we went (boys with new toys) it worked great until I disconnected the air compressor on the 2nd day and when I hooked it back up it developed an air leak on handle the bolt where coming loose and the gasket had slipped out the side so I shoved the gasket back in and tightened all the bolts and it worked like a charm.I'm only 200sqft into a 600sqft project, not one miss fire and the only problem I had was with the bolts being loose on handle. I would recommend this nail gun for the price, before using check all bolts, it was easy with the allen wrench right on the tool.I gave this a 4 because the handle on the hammer is loose after 4 days of use. A little better made hammer would be nice.Good luck!
Top to learn more